Leak Detection in Murrieta, Temecula & Riverside County, CA
Hot Springs Plumbing & Drains finds hidden water leaks for homeowners in Murrieta, Temecula, Menifee, Corona, Riverside and San Diego, California, so the repair is made where the leak actually is. Call or text (909) 970-0815.
Leak Detection, done properly
Many leaks cannot be seen. They run inside walls, under slabs or along buried supply lines, and the first sign is a higher water bill, a damp patch, a musty smell or the sound of water when everything is off.
Leak detection is about locating the leak first, so the repair opens only the place that needs opening. Listening equipment, pressure checks and a careful look at fixtures and valves narrow it down before anyone cuts into a wall or digs up a line.
Leak Detection: what we do
- Hidden leaks in walls and ceilings
- Leaks under slabs and floors
- Supply line leaks
- Water heater and valve leak checks
- Pressure testing
- Locating the leak before opening the wall
- Repair of the leak once found
- Explanation of what was found
When to call
- Your water bill has climbed with no change in use
- There is a damp patch, stain or bubbling paint
- You can hear water running when nothing is on
- The meter keeps moving with everything off
- A part of the floor feels warm or wet
Leak Detection in pictures
Tap any photo to enlarge. Images that start with “AI-generated illustration” are illustrations, not photos of our jobs.
What happens after you call
- Step 01
Call or text
Call or text (909) 970-0815 at any hour. Tell us what is happening, where, and what you can see.
- Step 02
We talk it through
You explain the problem and we tell you what to do right away, such as which valve to close, while we get to you.
- Step 03
Diagnose and explain
The problem is found, then explained in plain words, along with what is needed to fix it.
- Step 04
Fix it and check
The work is done, tested and cleaned up, and you get a walkthrough of what was changed.
Leak Detection across our service area
Leak Detection questions
Quick answers from the Hot Springs team.
How do you find a leak you cannot see?
By listening to the pipes with detection equipment, testing pressure and checking fixtures, valves and connections, so the leak is located before any opening is made.
Will you have to cut into my walls?
Only where the leak is. Finding it first keeps openings small.
How do I know I have a hidden leak?
Common signs are a rising water bill, damp or stained surfaces, a musty smell and a water meter that moves when everything is off.
Do you repair the leak too?
Yes. Once the leak is located, Hot Springs Plumbing & Drains can repair it.
More from Hot Springs Plumbing & Drains
01Open 24/7Emergency Plumbing
Burst pipes, flooding and sudden plumbing failures. Open 24 hours, every day. Call or text.
Explore Emergency Plumbing
02Plumbing Repairs
Leaking faucets, failed valves, worn fixtures, damaged pipes and pressure problems, fixed properly.
Explore Plumbing Repairs
03Water Heater Installation
Tank and tankless water heaters installed and replaced, so the hot water comes back.
Explore Water Heater InstallationGuide · 3 min readBurst Pipe: What to Do in the First Ten Minutes
If a pipe bursts, shut off the water at the main valve, turn off power to wet areas only if it is safe, move belongings out of the water, open a low tap to drain the lines and call a plumber.
Read the guideNeed leak detection? Call or text now.
Open 24 hours a day, 7 days a week. Call or text (909) 970-0815 and say what is happening.